how-to-charge-a-splat-ball-gun

While splat ball guns are pretty simple to use, you do need to know the basics of how to charge them up properly for the best performance.

Below is the step-by-step through the whole process of charging up your splat ball gun so you can start playing!

How To Charge A Splat Ball Gun? Key Takeaway

First fill the water reservoir, then load the splat balls into the barrel carefully. Next, pump the pressurization port 10-20 times to build pressure. Finally, put on eye protection and establish safety rules before starting your splat ball battle! I hope these tips help you charge up your splat ball gun properly and safely. Let me know if you have any other questions!

First off, let’s go over the key materials you’ll need to get your splat ball gun charged and ready for action:

how-to-charge-a-splat-ball-guns

Materials Needed to Charge a Splat Ball Gun

  • Splat ball gun itself – This is obviously essential! Be sure you have the full splat ball gun set.
  • Splat balls – These are the orbeez or water beads that your gun will shoot. Stock up so you don’t run out mid-game!
  • Water – To fill up the water reservoir in the gun. You’ll need about 1-2 cups of water.
  • Funnel or loading tube – Makes it easier to pour water into the reservoir without spills.
  • Eye protection – Safety first! Be sure to wear eye protection for everyone playing.

That covers the key items you’ll need. Seems simple enough so far, right? Now let’s get into the steps of prepping your splat ball gun:

Filling the Splat Ball Gun Reservoir

The first step in charging up your splat ball gun is filling up the water reservoir. This is what will give your shots the “splat” when fired! Here’s how to do it:

  • Locate and unscrew the reservoir cap. It’s usually on the bottom or back of the gun. Remove it completely.
  • Insert your funnel or loading tube into the now open reservoir.
  • Carefully pour about 1-2 cups of regular tap water from your faucet into the reservoir through the funnel. Don’t overfill! Stop at the max fill line if your gun has one.
  • Once filled, replace the reservoir cap tightly. You don’t want any leaking issues!

Filling the reservoir prepares the water supply for your gun. Now let’s move on to loading the splat balls:

Related Article: Why Is Your Splat R Ball Gun Not Shooting?

Loading Splat Balls into the Gun Barrel

loading-splat-balls-into-the-gun-barrel

With your reservoir full, the next step is getting the splat balls into the gun’s barrel chamber. Here’s the process:

  • Locate the barrel opening. In most models, you simply lift or slide open the barrel mechanism.
  • Take your package of splat balls and insert them one-by-one into the barrel carefully. You don’t want to jam them in.
  • Load about 10-20 splat balls into the barrel. Keep in mind this varies by gun model size.
  • Once you’ve loaded enough ammo, close up the barrel. Make sure it’s securely closed so balls won’t fall out.

And that’s it for loading up your water ammo! The gun is almost ready to use at this point. We just need to pump it up:

Pressurizing the Splat Ball Gun

Now we get to the pressurization step, which gives your gun the power to launch those gel balls. Here are the quick steps to pump up the pressure:

  • Locate the pressurization port on your specific splat ball gun model. Sometimes it’s built into the handle.
  • Attach the pump nozzle (should be included with your set) to the port opening.
  • Start pumping! Most models take 10-20 full pumps to build enough pressure. Just keep pumping until you feel significant resistance.
  • Once pressurized, you’re ready to disconnect the pump and start playing!

Pressurizing the chamber gives your shots distance and velocity. Make sure not to over-pump, as that can damage the gun. Okay, those are the basics of prepping your splat ball gun. But there are some important safety tips to keep in mind as well:

You May Also Read Top-Rated Best Splatter Ball Gun: Reviews and Recommendations

How To Charge Splat R Ball Gun Without Charger?

You will need to rig up a makeshift charger by connecting the battery terminals to a power source like a phone charger or USB port. Be very careful not to overload or damage the battery. I’d recommend getting an official charger as soon as possible for safety and proper charging.

How To Fix Splat R Ball Gun Battery?

If the battery won’t hold a charge, it likely needs to be replaced. Only use a battery specifically made for your splatrball gun model. Improper batteries can be dangerous. Replacing the battery yourself voids the warranty in most cases, so consider professional repair if possible.

How To Know When Your Splatrball Gun Is Done Charging?

Most splatrball guns will have indicator lights that turn from red to green when fully charged. You can also test the gun – a fully charged gun will have strong velocity and distance. If shots are weak, leave it charging longer. I made the mistake of underestimating charge time when I first got my gun. Patience pays off!

How Long Does It Take To Charge A Splatter Ball Gun?

I’ve found my orbeez gun takes about 2 hours to fully charge from dead. Be sure to use the manufacturer recommended charging time. Undercharged guns leads to weak shots and overcharging risks damaging the battery.

Complete Guide On: How Long Does A Splat Ball Gun Battery Last?

How To Charge Orbeez Gun?

Use the included charger, allow sufficient charge time according to instructions, and watch indicator lights to determine full charge. Handling the charging properly will mean you get the full splatting power and life from your orbeez blaster!

Now let’s go over some troubleshooting tips:

Troubleshooting Issues

While splat ball guns are generally pretty easy to use, you may occasional run into problems like:

  • Leaking – This is often caused by a loose reservoir or barrel cap. Double check that all your caps are tightened securely. Use thread tape if needed.
  • Jamming – Try not to overload the barrel with too many balls. Start with 10-20 and see if that helps with jams.
  • Low pressure – If your shots lack power, you likely need to pump the pressurization more. Aim for 10-20 full pumps minimum.
  • Breakages – Make sure everyone using the gun is doing so safely and not dangerously over-pressurizing.

Following this basic troubleshooting guide should help you address any minor issues that come up with your splat ball gun.

Conclusion

I hope this article clearly covered the full process for how to charge up your splat ball gun! While it may seem complicated at first, once you get the hang of it, prepping your splat launcher will become second nature. Just take it step-by-step:

  • Fill the water reservoir
  • Load the splat balls
  • Pump to pressurize
  • Wear eye protection
  • Establish safety rules

So get ready for some epic outdoor action and make some memories! Just be sure to charge up your splat ball gun properly beforehand. Let me know if you have any other questions down below!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *